Table of Contents
Advertisement
4. 48mm-58mm of the long screw shall be reserved outside
the wall as shown in the illustration. If the long screw
outside the wall is not long enough or much longer than
that needed, it should be adjusted with screwdriver or by
hand. Then apply lubricant to drainage pipe and limber
pipe to ensure a smooth installation.
4.
5. Install the Toilet as shown in the illustration, and use a
spirit level to ensure the lavatory to remain level.
5.
6. Install the reserved lock, gasket, hexagonal nut and
decoration cap onto long screw according to the order
shown in the illustration.
Note:
Please refer to the installation instructions of toilet.
6.
1338609-T01-B
48mm-58mm
48mm-58mm
Long Screw
Reversed Lock
Gasket
Hexagonal Nut
Decoration Cap
-11-
Long Screw
Lubricant
Spirit Level
Advertisement
Table of Contents
