Kohler K-20797T-SL Installation Instruction

Floor standing toilet
Hide thumbs Also See for K-20797T-SL:

Advertisement

Quick Links

BEFORE YOU BEGIN
BEFORE YOU BEGIN
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2018).
·
This product complies with Q/KCI-006-2018 and GB
25502-2017.
Water Efficiency Grade 1 for K-20168T-SL-CG1/K-
20797T-S/K-20797T-SL/K-20798T-S/K-20798T-SL/K-
20799T-S/K-20799T-SL/K-21297T-SL/K-21297K-S/K-
21297K-SL/K-23098T-BNS/K-23098T-BNSL/K-23098T-
CPS/K-23098T-CPSL/K-23097T-BNS/K-23097T-BNSL/K-
23097T-CPS/K-23097T-CPS.
Water Efficiency Grade 2 for K-21564T-GSL/K-21564T-
GS.
ORDERING INFORMATION
MING Toilet-Chinese Ink Gray ...................K-20168T-SL-CG1
Includes VEIL FS Toilet ......................................K-20706T
Includes MING Tank With Cabinet-
Chinese Ink Gray .........................K-20707T-CG1
Includes REACH Slim Quiet-Close Toilet Seat ...K-77471T
Includes Plastic Trap Way ....................................1249428
VEIL WF Toilet W/SC ST
(HT200 P, 3/4.5)....................................................K-20797T-S
Includes 3/4.5L HT200 PNE IWT W/O F
(VEIL WF)...............................K-78074T-VLS-NA
Includes VEIL FS Toilet ......................................K-20706T
Includes Saile QC Toilet Seat,
Hidden Hinge Base.................................K-4141T
Includes P-Trap for Optional Wall Installation.......1036901
No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137
8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA
NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC
1332802-T01-E
K-20168T-SL-CG1/K-20797T-S/K-20797T-SL/K-20798T-S/K-20798T-SL
K-21564T-GS/K-21564T-GSL/K-23098T-BNS/K-23098T-BNSL/K-23098T-CPS
K-23098T-CPSL/K-23097T-BNS/K-23097T-BNSL/K-23097T-CPS/K-23097T-CPSL
please leave instructions for the
K-20799T-S/K-20799T-SL/K-21297T-SL/K-21297K-S/K-21297K-SL
·
·
·
·
2018)
·
Q/KCI-006-2018 GB 25502-2017
K-20168T-SL-CG1/K-20797T-S/K-20797T-SL/K-20798T-
S/K-20798T-SL/K-20799T-S/K-20799T-SL/K-21297T-
SL/K-21297K-S/K-21297K-SL/K-23098T-BNS/K-23098T-
BNSL/K-23098T-CPS/K-23098T-CPSL/K-23097T-BNS/K-
23097T-BNSL/K-23097T-CPS/K-23097T-CPS
1
K-21564T-GSL/K-21564T-GS
-
(
200
3/4.5
(
(
) ............................................................K-4141T
2
8
256410
1
©
Copyright Kohler China Investment Co., Ltd. 2019
-1-
©
INSTALLATION INSTRUCTION
FLOOR STANDING TOILET
ASME
..................................K-20168T-SL-CG1
...................................K-20706T
-
.................................................K-20707T-CG1
................................K-77471T
....................................................1249428
, 3/4.5L).................................K-20797T-S
200
).........................................K-78074T-VLS-NA
...................................K-20706T
....................................................1036901
528137
POST CODE:
110400
VEIL
-
(A112.19.2-
2
:
256410
POST CODE:
110400
2019

Advertisement

Table of Contents
loading

Summary of Contents for Kohler K-20797T-SL

  • Page 1 Hidden Hinge Base.........K-4141T Includes P-Trap for Optional Wall Installation..1036901 ............1036901 No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137 528137 8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA POST CODE:...
  • Page 2 VEIL WF Toilet W/SL ST , 3/4.5L).......K-20797T-SL (HT200 P, 3/4.5)..........K-20797T-SL 3/4.5 Includes 3/4.5L HT200 PNE IWT W/O F )........K-78074T-VLSL-NA (VEIL WF)......K-78074T-VLSL-NA ........K-20706T Includes VEIL FS Toilet ........K-20706T Includes REACH Slim Quiet-Close Toilet Seat ...K-77471T ........K-77471T Includes P-Trap for Optional Wall Installation..1036901 ............1036901...
  • Page 3 VEIL WF Toilet W/SC , 3/4.5L).....K-23098T-BNS (Beam SR A/BN, 3/4.5) ........K-23098T-BNS Includes VEIL WF Toilet W/SC ....K-23099T-ANS ).......K-23099T-ANS Includes BEAM Toilet Sensor (3/4.5L & 3/6L )..K-30948T-BN (3/4.5 & 3/6L, AC)......K-30948T-BN Includes Saile QC Toilet Seat, ) ............K-4141T Hidden Hinge Base.........K-4141T ............1036901 Includes P-Trap for Optional Wall Installation..1036901 VEIL WF Toilet W/SL...
  • Page 4 SAFETY WARNINGS Kohler products are precision-engineered and should give continued superior and safe performance, provided: 1. They are installed, commissioned, operated and maintained in accordance with the recommendations given in this Manual. 2. Periodic attention is given, as necessary, to maintain the product in good functional order.
  • Page 5: Specification

    Back Installation Finished Floor With 1226681 S-trap (For Separate Purchase) 1226681 Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. SPECIFICATION Plumbing Connections Recommended inlet connections are 3/8 BSP. " 3/8" BSP INSTALLATION Install Flushing Mechanism 1. Install The Tank 1) Turn the water supply off before installing the new toilet.
  • Page 6 Install The Toilet 1. Install the waste outlet and water inlet as shown. UNIT mm S.trap P.trap Fig.#2 2. Put the bowl in position, and using a pencil, mark the position of the bowl on the floor, as shown. Mark the positions for the tank attachment bolts on the wall.
  • Page 7 The expansion of cement due to a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any damage caused by installation with the use of cement. 1332802-T01-E...
  • Page 8: User Maintenance

    CAUTION: Don t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.
  • Page 9: Before You Begin

    Kohler will not be responsible for any damage related to above mentioned cleanser or solvent. Mild detergent can be used. Do not apply spares that are not provided by Kohler, and please note that glass adhesive tape shall not be applied to the installation of Kohler spares.
  • Page 10: Function Explanation

    ) ..........................K-4178T , 3.0/6.0L) ......................K-4178T-VES2 , 3.0/6.0L) ......................K-4178T-VE2 , 3.5/6.0L) ....................K-4178T-ESS 300 3.0/4.5L .............................K-4179T , 3.5/5.0L) ......................K-4179T-VLS , 3.5/5.0L)....................K-4179T-DNSW , 3.5/5.0L) ......................K-4179T-DNW , 3.5/5.0L)......................K-4179T-VABW , 3.5/5.0L) ......................K-4179T-RES 300 3.0/4.5L ........................K-10611T , 3.5/5.0L) .....................K-10611T-RES , 3.5/5.0L) ..................K-10611T-ESS , 3.0/4.5L)....................K-10611T-VLS , 3.0/4.5L)....................K-10611T-VLSL )............................K-4177T )............................K-8857T )..............................K-20341T...
  • Page 11: Specifications

    Advantages Of In-wall Tank Made of macromolecular materials that prevents corrison and leaking. Advanced water tank fitting, which makes possible the adjustment of the water discharge and double flush. Will not affect the structure of the wall and provides excellent sound insulation. Easy installation and time efficient.
  • Page 12 RECOMMENDES TOOLS AND MATERIALS RECOMMENDES TOOLS AND MATERIALS Open end/adjustable wrenches Allen wrench Knife File Hacksaw Masonry Level Screw driver Insulation tape Tape measure Seal tape Bushing Lubricant ROUGHING-IN Reference Value UNIT: mm K-4179T/K-4179T-VLS/K-4179T-DNSW K-4179T-DNW/K-4179T-VABW/K-4179T-RES K-10611T/K-10611T-RES K-4178T/K-4178T-VES2/K-4178T-VE2/K-4178T-ESS K-10611T-ESS/K-10611T-VLS/K-10611T-VLSL 478 3 438 3 90~142 18~62...
  • Page 13 Elbow Drain outlet 90mm, welding A B C 90mm Water Tank Bracket Discharge Elbow Drain outlet 110mm 110mm Water Tank Bracket Discharge Elbow Drain outlet 110mm, welding 110mm Kohler reserves the right to change marked dimensions without prior notice. 1263048-T01-D...
  • Page 14 INSTALLATION Way of Installation There are two ways to install this product: in-wall tank with frame & in-wall tank without frame In-wall Tank With Frame In-wall Tank Without Frame Installation For In-wall Tank With Frame Plug Paper Board Board A. Installation of In-wall Tank 1.
  • Page 15 3. Drill four holes with diameter of 10mm and depth of 80mm Bulge Screw with churn drilling as shown. A. Fill the bulge nail into the instruction hole on the wall, fix Mounting the fixing frame to the bulge nail, adjust the gasket and Bracket tighten the nut.
  • Page 16 2. Tighten the long screw into the holes of the tank bracket Inlet Hole and cover the drainage hole with the big cap, cover the Tank Bracket inlet hole with the small cap. Small Cap Long Screw Drainage Hole Big Cap 3.
  • Page 17 2. Tighten the long screw into the holes of the tank bracket Small Cap and cover the drainage hole with the big cap, cover the Inlet Hole inlet hole with the small cap. Long Screw Drainage Hole Big Cap Tank Bracket 3.
  • Page 18 3. Install the big and small leak-proof gaskets on inlet pipe and outlet pipe ,then install it to corresponding pipes on the toilet tank. Small Leak-proof Gasket Inlet Pipe Drainage Pipe Big Leak-proof Gasket 4. 48mm-58mm of the long screw shall be reserved outside the wall as shown in the illustration.
  • Page 19: Faceplate Installation

    E. Faceplate Installation Mask Slot B 1. Push slot A and slot B of the break water board forward and then insert into the detent. Break Water Board Tip 1: When installing the break water board, please make Slot A sure the slot is align with the detent.
  • Page 20 5. Install the faceplate as shown in the illustration. Put the lock on the faceplate directly on the reversed lock on supporting board, then push the faceplate and lock it. The installation shall begin from bottom to top. Faceplate Lock Supporting Faceplate Board...
  • Page 21 2. Make sure of h according to dimensions of bowl and then Bulge Screw locate the installation hole of fixing bracket. Mark on the wall for appropriate position for fixing bracket, and drill four Fixing Bracket holes with diameter of 10mm and depth of 80mm with churn drilling as shown in illustration, and fill in the holes with bulge screw and tighten the screw to set the fixing bracket.
  • Page 22 Mask 6. When finishing the brickwork, eliminate unwanted part of the mask, the drainage pipe and the inlet pipe. Sharp Knife Note: When building the wall, the product cannot be cast and filled by cement or be squeezed. Inlet Pipe Drainage Pipe 7.
  • Page 23 2. Loosen the long screws as shown. Supporting Board 3. Tighten the locknut to the marked position of OPEN to " " take out the supporting board. Locknut OPEN Supporting Board 4. Take out the supporting board as shown. Supporting Board 5.
  • Page 24 7. Hold the top of the bracket, and unplug the locknut by pulling the bracket. Bracket 8. Turn on/off the water supply Turn on /off the water supply by turning the valve. Valve 9. Take out the bracket as shown. Bracket 10.
  • Page 25 12. Hold the upside of the fixing lock, and take it out as shown. Fixing Lock Fixing Lock 13. Pull discharge valve along the arrow direction as shown to remove discharge valve. Outlet Valve 14. Remove discharge valve as shown and then take valve out for cleaning.
  • Page 26: Troubleshooting Procedures

    B. Adjust Inlet Valve Inlet Valve Hoist and reduce the water level in the tank by adjusting Control Pole the control pole. Turn the control pole counterclockwise to lower down the floating box and reduce the water level of the tank .turn the control pole clockwise to hoist the floating box and increase the water level in the tank.
  • Page 27 1263048-T01-D -19-...

Table of Contents