Kohler VEIL K-20534T-S Installation Instructions Manual page 22

C. Install air pump to faceplate, connect emergency
flush air hose to outlet pipe in faceplate. Connect
output signal cable and input signal cable together,
and tighten nut.
C.
D. Connect big flush air hose and half flush hose to
outlet joint in air pump. Connect power output cable of
transformer and power input cable of faceplate
together, and tighten nut. Put the lock on the cover
directly on the reversed lock on support board, then
push the cover and lock it. The installation shall begin
from bottom to top.
NOTE: Cut the excessive parts of air hose if
necessary and fix it onto the tank fastener.
D.
1338609-T01-B
Ribs on air pump should be assembled into slots on faceplate
Emergency Flush Air Hose
Full Flush Air Hose
Manual Flush
Full Flush
Faceplate
Supporting
Board
Lock
-16-
Slot A
A
Slot B
B
Rib A
A
Rib B
B
(A-A/B-B)
Input Signal
Cable
Input Signal Cable
Faceplate Power Input Cable
Transformer Power Output Cable
Half Flush Air Hose
Half Flush
Faceplate