Device Configuration Dialog - Device Data Tab - AMX AXT-CA10 Instruction Manual

Using the DXP-PRO Wizard

Device Configuration dialog - Device Data tab

FIG. 4 Device Configuration dialog (Device Data tab)
These options in the Device Data tab allow you to associate a control method to a new device in the
system. The options in this tab include:
There are several devices that have device specific options that become visible when the device is
selected.
30
Control Configuration tab: The options in this tab are used to configure the AMX IR
port to properly transmit the IR signal to the AV equipment. This tab requires that you
know how your equipment operates. Note that the Control Configuration tab is only
applicable if:
The selected device is IR-controlled (IR was selected as the Control Method in the
Device Data tab).
An IR file has been associated with the device (via the IR Data options in the Device
Data tab).
Power Control tab: The options in this tab allow you to configure power control for the
AV equipment. This tab requires that you know how your equipment operates.
The Device Data section is used when defining a source you must first define the type of
the source. The Source Type determines what pages are added to the touch panel file and
what control functions are assigned to the device. The Display Name is used with the
touch panel menus to reference the device. Each Display name should be unique to
differentiate the devices in the wizard and on the touch panel.
DXP-PRO v1.1 - Programmer's Guide