Switcher Inputs/Outputs Dialog; Switcher Inputs Tab - AMX AXT-CA10 Instruction Manual

Using the DXP-PRO Wizard
FIG. 15 Input Names dialog
To edit the Display Text field information
1. Select a Default Input Name from the list and make any necessary changes within the Display
Text field (lower portion of the page).
2. Click the Apply button to apply your changes.

Switcher Inputs/Outputs Dialog

These dialog tables (FIG. 16) allow you to assign the inputs and outputs of the switcher(s) in your
system. There are two distinct sections in this dialog - Inputs and Outputs.

Switcher Inputs tab

Within the Inputs section, in addition to assigning devices to inputs of the switcher, you can
provide a display name and the input type for each device (Audio/Video, Audio Only, or Video
Only). The number of inputs available in this section is based on the information that was entered
on the System Information page.
The lower part of this tab contains a series of selectable fields and radio buttons that allow you to
populate the available inputs to the Switcher:
52
Input Number - This column is a list of all available input values open for assignment to
the current list of source devices.
Display Name - This column is a list of the current source devices assigned to the Input
values on the Switcher. These can be found within the System Information page.
Input Type - This column differentiates between Audio/Video, Video Only, and Audio
Only inputs. This is important when using RS-232 Control Logic. These are selectable
from the Input Type radio buttons.
DXP-PRO v1.1 - Programmer's Guide