AMX AXT-CA10 Instruction Manual page 58

Using the DXP-PRO Wizard
By default, when you select the TakeNote option, from within the Touch Panel
Interface dialog, TakeNote becomes enabled within the G4CC panel page even
before it is selected.
48
Scrolling - allows you to scroll through the menu buttons using left and right-arrow
buttons.
Static - all menu buttons are displayed - no scrolling involved.
Use PopUp Page Effects - allows you to enable popup page effects within the touch
panel project pages.
Use Picture Frame for Inactivity - allows you to enable the PictureFrame application
when the touch panel becomes inactive. If this box is checked, you will need to later open
the touch panel file created by the DXP-PRO wizard and setup the dynamic image
properties to pull its information from the PC running the PictureFrame application. This
option tells the PRO wizard to no longer use the DXP-PRO Logo page when the panel
times-out but to rather use the PictureFrame page.
PictureFrame must be running on the specified PC to be displayed on the target panel.
If the panel timeout is set to zero, the panel will never go to the PictureFrame page.
Use TakeNote! - allows you to enable the TakeNote functionality within a pre-selected
G4 Computer Control (G4CC) page. G4 Computer Control MUST first be selected as a
Source Type within the Device Data tab of the Device Configuration dialog page before
being able to select TakeNote. If you wish to use TakeNote in conjunction with G4CC,
this option must be selected.
Two conditions must be met for the TakeNote! radio box to be selectable:
G4CC and/or AUX/PC must be defined as Source Types within the Device
Configuration dialog AND a Modero panel must be added to the list of
available panels. If both of these conditions are met, the TakeNote! radio box is
selectable. If either of these conditions is not met, the radio box is greyed-out.
To disable TakeNote, you must first press the TakeNote Controls button, toggle
the Activate Annotation button (FIG. 35) to the Off state, and press Close.
To re-establish the TakeNote feature, return to the TakeNote popup menu,
toggle the Activate Annotation button back to the On state, and press Close.
The Exclude from Navigation Menu selections allow you to exclude these menu items
(Source Types) from the menu (no buttons with which to access these pages). This
might be used if the developer doesn't want an end-user accessing or altering settings for
these sources. The sources which can be omitted are:
Display Button
Lights Button
Macros Button
Relay Button
DXP-PRO v1.1 - Programmer's Guide