Peripheral Setup - American Megatrends Super Voyager PCI-II User Manual

Power Management Setup,
Serial Port Activity
When this option is set to Monitor, the system BIOS monitors all serial port activity and sends the computer to suspend state
if no serial port activity occurs for the length of time specified in the Suspend Timer Value Power Management option. The
settings are Monitor or Ignore. The Optimal default setting is Monitor.

Peripheral Setup

Set the WINBIOS Setup options described below by choosing the Peripheral Setup icon from the WINBIOS Setup main
menu.
Onboard FDC
Set this option to Enabled to use the floppy drive controller on the motherboard. The settings are Enabled or Disabled. The
Optimal default setting is Enabled.
Onboard IDE
Set this option to Enabled if using the primary or secondary IDE controller on the motherboard. To use an offboard IDE
controller, set this option to Disabled. The settings are Enabled or Disabled. The Optimal default setting is Enabled.
OffBoard PCI IDE Card
This option can only be selected if the Onboard IDE option is set to Disabled. You cannot set this option if using the IDE
controller on the motherboard. This option allows you to specify the PCI expansion slot that an IDE controller adapter card
occupies. The settings are Absent, Slot1, Slot2, or Slot3. The Optimal default setting is Absent.
Chapter 3 AMIBIOS and WINBIOS
52
Continued