American Megatrends Super Voyager PCI-II User Manual page 57

Peripheral Setup,
Continued
Primary Master IDE LBA Mode
Primary Slave LBA Mode
Secondary Master LBA Mode
Secondary Slave LBA Mode
Set these options to Enabled to enable IDE LBA (Logical Block Address) Mode for the primary master, primary slave,
secondary master, or secondary slave IDE drive. LBA Mode is an advanced method for accessing data on IDE drives. Data is
accessed by block addresses instead of the AT-standard Cylinder-Head-Sector scheme. Data transfer rates can be much higher
in LBA mode. The settings are Enabled or Disabled. The Optimal and Fail-Safe default settings are Disabled.
The drive is re-mapped each time this option is enabled or
disabled and existing data is destroyed.
Primary Master IDE 32Bit Transfer
Primary Slave IDE 32Bit Transfer
Secondary Master IDE 32Bit Transfer
Secondary Slave IDE 32Bit Transfer
These options specify that the primary master, primary slave, secondary master, or secondary slave IDE drives support 32-bit
data transfers. The settings are Enabled or Disabled. The Optimal default setting is Enabled.
Chapter 3 AMIBIOS and WINBIOS
54
Warning
Cont'd