Peripheral Setup - American Megatrends Titan II User Manual

Peripheral Setup

The WINBIOS Setup options described below are selected by choosing the Peripheral Setup icon from the
WINBIOS Setup main menu.
Onboard FDC
Set this option to Enabled to use the floppy drive controller on the motherboard. The Optimal default setting is
Enabled.
Onboard Primary/Secondary IDE
This option specifies which IDE controller is enabled. The Optimal and Fail-Safe default settings are Disabled.
Primary IDE Block Mode
This option specifies the IDE drives attached to the primary IDE controller that support block mode. The Optimal
and Fail-Safe default settings are Disabled.
Primary IDE 32-Bit Transfer
Specifies the IDE drives attached to the primary IDE controller that support 32-bit transfers. The Optimal and Fail-
Safe default settings are Disabled.
Primary IDE LBA Mode
Specifies the IDE drive attached to the primary IDE controller that support LBA mode. The Optimal and Fail-Safe
default settings are Disabled.
Warning
The drive is re-mapped each time this option is enabled or
disabled. Existing data will be destroyed.
Chapter 3 AMIBIOS and WINBIOS
42