American Dynamics TMV910Q User Manual page 58

User's Guide
VCR Input Check:
Used by the installer to diagnose problems with the VCR input. Change this item to
'ON', and select VCR playback mode. There will be two rows on the screen; the first
row displays the total number of fields coming from the VCR, the second row
displays the fields with errors detected in data encoding.
Super MMX Mode:
This function is used for Matrix-Multiplexer systems. The system skeleton should be
set up as shown in the following figure. If "ON" is selected, the Call Monitor display
will depend on RS-485 commands. The Call Monitor output of MUX1-16 must be
connected to the video input of MUX17, to allow monitoring any of up to 256
cameras. For information on commanding the multiplexer in super MMX mode,
please refer to the user manual of the remote keyboard. To control the multiplexer
using a computer or other devices, please refer to Appendix C of this multiplexer user
manual.
If "OFF" is selected, the Call Monitor will work as defined in Configuration Table 1 or
the Alarm Set Up Menu (if there is an alarm condition).
Figure 9 — Matrix-Multiplexer Super MMX Mode Setup
50 Advanced Setup Using On-Screen Menus