Alarm Set Up; Schedule Set Up - American Dynamics TMV910Q User Manual

ALARM SET UP

Refer to Basic Alarm Features
capabilities of the multiplexer. The following menus allow the user to configure how
alarm conditions are handled. In the Main Menu, move the cursor to 5 Alarm Set Up
and press Enter. The following menu will be displayed:

Schedule Set Up

The Alarm Processor allows you to define 2 time periods to create a schedule for
alarm operation: the Day Frame and the Night Frame. Each Frame has its own begin
and end times, and the motion detection setup of each camera can be defined
individually for each frame. The 16 Alarm In pins can also be individually enabled or
disabled for each frame.
Advanced Setup Using On-Screen Menus
on page 19 for a technical introduction to the alarm
Alarm Set Up
1 Schedule Set Up
2 Day/Night Switch
3 Alarm Response
4 Motion Detect
5 Alarm In
6 Video Loss Detect
7 Alarm Set/Reset SW
8 Release Time
9 Alarm List
10 Clear Alarm List
11 Exit
Schedule Set Up
1 Day Frame Set Up
2 Night Frame Set Up
3 Configuration Table 2
4 Exit
Triplex Digital Video Multiplexer
Dis
en
35