American Dynamics TMV910Q User Manual page 48

User's Guide
MENU ITEM
Alarm Spot Display
Response Duration
Any Key To Stop
40
DESCRIPTION
Select "YES" for this item to cause the Call Monitor to
switch to the corresponding camera when an alarm event is
triggered. If "NO" is selected, the Call Monitor will
continue to follow the Call Monitor switching sequence in
Configuration Table 1. (See page 28)
This item allows you to decide how long the buzzer and
Alarm Out relay will function after an alarm is triggered.
The value can range from 1 to 9999 seconds.
If this setting is enabled ("YES"), the operator will be able to
turn off the buzzer and alarm relay responses following an
alarm by pressing any key.
Advanced Setup Using On-Screen Menus