Power On Detect; Title Position - American Dynamics TMV910Q User Manual

Step-by-step:
1. Use the UP/DOWN keys to select a camera, press Enter to edit the title.
2. Use the Mode Select keys to position the cursor in the title entry field.
3. To place characters in the camera title, use the Direction keys to move the cursor
through the lists of characters to the character you need, then press Enter to
select.
4. Press Esc after title entry is finished.

Power ON Detect

The item allows you to enable/disable camera auto detection during multiplexer
power-ON. If cameras are added or removed, then using this feature can be a
convenient way of ensuring that unused channels are automatically removed from
the signal recorded by the VCR. However, if a camera is connected but simply turned
off when the multiplexer is powered-up, it will show as undetected. To fix the
problem, turn on the camera and reset the multiplexer. If the Power ON Detect feature
is disabled, use Camera Auto-Detect to detect all connected cameras.

Title Position

The camera title can be placed in one of five positions in the display window: Default
(top-middle); Top-L (top-left); Top-R (top-right); Btm-L (bottom-left); Btm-R (bottom-
right). (Use the RIGHT/LEFT Direction keys to select.)
Advanced Setup Using On-Screen Menus
Triplex Digital Video Multiplexer
31