Appendix D: Keyboard Commands For Adtte; Operator Functions - American Dynamics MegaPower 3200 Operator's Manual

Appendix D: Keyboard Commands for ADTTE

The table below explains control functions for cameras using the ADTTE Touch Tracker
further information, refer to ADTTE Touch Tracker Operator's Manual, 8000-2675-02.
Figure 8. ADTTE Touch Tracker matrix keyboard layout

Operator Functions

Function
System Log On
System Log Off
Keyboard Lock/Unlock
Select Monitor
Call Camera
Lock Camera
Unlock Camera
Pan/tilt Camera
Zoom Camera
Focus Camera
Adjust Iris
Call Preset
Run Pattern
Run System Tour
MEGAPOWER CPU
OPERATOR'S GUIDE
Actions
-Enter User Code
-Press User
-Enter keyboard password
-Enter monitor # -press
-Enter camera # -press
-Enter camera # -press 2
-Enter camera # -press 1
-Move control stick left/right or forward/backward
-Press Zoom buttons (left side of control stick) for Tele or Wide
-Press Focus buttons (right side of control stick) for Far or Near
-Press Iris Open to brighten picture
-Call camera -enter the Preset # (1-72)
-Call camera -enter Pattern #
-Select monitor -enter Tour #
-press Ack -Enter System Passcode
-press Lock (toggles on and off)
- press F1
-press F1
-press Iris Close to darken picture
-press Pattern
-press Run
17 of 20
®
Matrix Keyboard. For
-press Ack
-press Shot
-press Run
-press Ack
8200-0421-02, REV. D