American Dynamics MegaPower 3200 Operator's Manual page 17

Function
Call Preset
Run Tour
Control Tour
Call Salvos
Acknowledge Alarm
View Multiple
Sequencing Alarms
Control Auxiliary
Lock Camera On/Off
View Satellite Sites
Disconnect/Log Off
Satellite
Run Pattern
Keyboard Contrast
VCR Mode
F2 Functions
MEGAPOWER CPU
OPERATOR'S GUIDE
Actions
-Call camera -enter the Preset #
-Select monitor -enter Tour #
• To hold a Tour, hold down
• To restart a Tour, press
• To step forward or backward through a Tour, press
• To reverse the direction of a Tour, press
once.
• To stop a Tour, call a camera.
-Enter lowest monitor #
press
-Call alarming monitor
-Press and
alarms
-Call camera -press:
• Auxiliary 1 on/off
• Auxiliary 2 on/off
• Auxiliary 3 on/off
• Auxiliary 4 on/off
Note: Auxiliary 4 is not supported by all receiver/driver and dome protocols and
configurations.
-Enter camera # -hold down
-Enter site # -hold down
Note: This function only displays the previous user-selected site number.
-Enter local site # -hold down
-Call camera -enter Pattern #
-Press and
-press ENTER
-Enter VCR # -press
-Enter function # -press and hold
-press
-press
and press
-press -enter Salvo #
-press
to hold sequence -press
and press
and press
and press
-press
-use Focus and
15 of 20
or
once. To resume forward, press
-hold down
or to step through
-call camera as usual
-call local camera
to increase/decrease contrast
-press
8200-0421-02, REV. D
and