Programming Functions - American Dynamics MegaPower 3200 Operator's Manual

Function
DirectSet
(SensorNet only)

Programming Functions

Note: Programming functions depend on the communications protocol in use and may not be available for
your keyboard. Functions having an asterisk (*) in the Function column require PROGRAM MODE, which is
indicated by the unlocked
Function
Enter Program Mode
Exit Program Mode
* Program Presets
* Program Patterns
* Clear Patterns
MEGAPOWER CPU
OPERATOR'S GUIDE
Actions
•
-Press only to display or close the DirectSet menu, or
•
-Enter 0 -press
•
-Enter a number
or not the menu is displayed
Notes:
•
When in Program mode, the ADCC0300 keyboard provides additional administrative
functions (see Programming Functions below for instructions for entering Program
mode)
•
All SpeedDome Optima camera domes can receive DirectSet commands, but do not
display the menus.
icon displayed in the LED.
Action
-Enter 999 -press
-Enter 999 -press
-Call camera -move camera into position
-enter Preset # -press
-Call camera -move camera into position
-press
-enter number (1-3)
-press -maneuver camera with joystick
-press to save pattern
-Press -enter Pattern # (1-3)
-press to delete pattern
to display or close the DirectSet menu, or
-press to select a DirectSet menu command whether
-enter passcode
-press
16 of 20
-press ENTER
-press
8200-0421-02, REV. D