Directset Menu - American Dynamics SpeedDome Ultra 8 Quick Reference Manual

When a dome powers up, it finds Pan/Tilt home,
determines the network type, and then performs the
following sequential tests:
•
Checks if its own address has changed.
•
Checks if its address matches the base IO address.
If it does not, the Dome Address Changed screen
appears to allow a change to be made.
•
Verifies that its configuration data matches the
configuration data stored in the base IO.
The screen shown below briefly appears during:
•
The updating process.
•
Verification when dome configuration data does not
match configuration data stored in the base IO
memory and indicates the dome is copying the IO
base configuration data.
Restoring Dome Data
Names Buffer
TPB Buffer
The screen below briefly appears when base data is
cleared. When base data is cleared, all presets, patterns,
and other configurations stored in the base IO memory
are deleted.
Updating IO Base Memory!
Please Wait!
Note: After verification is complete, the last screen that
was displayed before the dome was powered down will
reappear.
SPEEDDOME ULTRA 8 CAMERA DOME CONFIGURATION UTILITY
QUICK REFERENCE GUIDE

DirectSet Menu

10
0 TOGGLE DIRECT SET MENU
1 DOME CONFIGURATION MENU
2 AUTO IRIS & AUTO FOCUS
3 FLIP
4 PEEL PATTERN
5 SET NORTH POSITION
6 LINE LOCK OFF
7 LINE LOCK ON
10 NIGHT MODE
FOCUS FAR=next page
11 DAY MODE
12 AUTO DAY/NIGHT MODE
13 WDR ON
14 WDR OFF
15 SMOOTH SCAN
16 STEPPED SCAN
17 RANDOM SCAN
20 DOME INFORMATION
48 EIS OFF
Use FOCUS to select page
49 EIS 5
50 EIS 10 Hz
51 SEQUENCE
52 SEQUENCE
53 SEQUENCE
54 SEQUENCE
55 SEQUENCE
56 SEQUENCE
57 SEQUENCE
Use FOCUS to select page
58 SEQUENCE
59 SEQUENCE
60 SEQUENCE 10
61 SEQUENCE 11
62 SEQUENCE 12
63 SEQUENCE 13
64 SEQUENCE 14
65 SEQUENCE 15
66 SEQUENCE 16
FOCUS NEAR=previous page
10 of 11
35X Camera Dome
DirectSet Menu Screen 1 of 4
DirectSet Menu Screen 2 of 4
DirectSet Menu Screen 3 of 4
Hz
1
2
3
4
5
6
7
DirectSet Menu Screen 4 of 4
8
9
8200-0600-02, REV. B