14
en | Wiring and connections
4.4
Installing weather plate and gland nuts
2019.10 | V01 | F01U361103
1.
Remove the weather plate and (2)
screws (X12i-128 only) from the input
panel.
PH2
x2
X12i-128
2.
Remove the gland nut kit and (2)
terminal block connectors from inside
the input panel.
3.
Install the gland nuts onto the plates. If
the loudspeaker only requires one cable,
use the gland nut plug on one of the
gland nuts.
x1
4.
Feed the cable through the gland nut
and weather plate.
User manual
X-Line Advance Install
Bosch Security Systems B.V.