System Overview - Electro-Voice X-Line X1i User Manual

X-Line Advance Install
2

System overview

The X-Line Advance Install loudspeaker is a premium line-array loudspeaker system designed
for high performance permanent install applications, such as sports arenas, houses of
worship, and performing arts centers. The system represents a culmination of EV's extensive
experience in designing large format line array systems for touring applications, as well as
deep knowledge in designing ruggedized install loudspeaker systems that can survive in harsh,
direct exposure environments.
All models feature stainless steel hardware and grilles, weatherized transducers, and durable
void-free birch enclosures with internal bracing and a rugged polyurea coating. The heavy-duty
cast aluminum input panel has dual 8-conductor terminal blocks with a current capacity that
exceeds 40 amps continuous. Plates with gland nuts are included with each speaker to fully
seal the terminal blocks inside the input panel and to present a clean, consistent look for the
rear of the loudspeaker.
The fiberglass models are specifically designed for harsh environments, including direct
exposure to the elements. In addition to the features already described, each fiberglass
enclosure is coated with a durable fiberglass resin on all external and internal surfaces to seal
the marine-grade plywood. The grilles are backed with a special hydrophobic cloth that
minimizes water intrusion without impeding the acoustic output of the speaker.
X-Line Advance Install is part of a comprehensive product portfolio for commercial and
installation applications, capable of supplying a complete system solution. This includes the
main loudspeaker system, rigging, amplifiers, digital signal processing, and paging
loudspeakers. By providing an entire system solution, we ensure optimum performance,
consistency and reliability.
X-Line Advance Install is designed to be powered and controlled by Dynacord IPX series
amplifiers and SONICUE sound system control software. Presets for all X-Line Advance Install
products are configured within SONICUE for ease of setup and installation. Drive electronics
for X-Line Advance Install can also be configured, controlled and monitored in EV's IRIS-Net
software environment.
Users can configure X-Line Advance Install arrays with EV's proprietary PREVIEW Loudspeaker
Software. PREVIEW will also validate the mechanical forces at each rigging connection point
and will warn the designer if any part of the array is deployed beyond a safe working load.
PREVIEW Loudspeaker Software must be used in order to properly design and suspend the
array.
Bosch Security Systems B.V. User manual
System overview | en 7
2019.10 | V01 | F01U361103