Tour X Series Owner’s Manual Thank you for choosing the Electro-Voice® Tour X series loudspeaker system. Please take time to con- sult this manual so that you can understand all the features built into your EV system and fully utilize all its performance capabilities.
Secure the cables with wire ties or tape whenever possible. Ground Stack: The Electro-Voice® TX2152 can be vertically stacked on a TX2181 to elevate the horn above the audience. Unless you can safely lift the weight of the loudspeaker on to the ground stack, have another person to help you place it.
Description The Electro-Voice® Tour X professional loudspeakers are a unique and highly-functional package of pro audio performance, versatility and aesthetics. Many of the design features are taken from EV’s many years of experience in designing transducers and loudspeaker systems for high quality concert touring appli- cations.
Page 5
(Figure 2). If the eyebolts are removed, reinstall the screw; otherwise air leaks will occur in the enclosure, resulting in undesirable performance. Figure 2a: Figure 2b: Removing the 3/8” Screws from Installing the Fender Washers and the Loudspeaker Eyebolts to the Loudspeaker Electro-Voice® Tour X Owner’s Manual...
Page 6
Suspension Point 50 lbs Max Force in any Direction, Pull-Back Only Figure 4a: Figure 4b: Figure 4c: Maximum Working Load - Maximum Working Load - Maximum Working Load - Vertical Orientation Pull-Back (Rear) Point Horizontal Orientation Electro-Voice® Tour X Owner’s Manual...
Page 7
Figure 5a: Figure 5b: Tour X Vertically Suspended Tour X Vertically Suspended (CORRECT) (INCORRECT) Figure 6a: Figure 6b: Figure 6c: Tour X Horizontally Suspended Tour X Horizontally Suspended Tour X Horizontally Suspended (CORRECT) (CORRECT) (INCORRECT) Electro-Voice® Tour X Owner’s Manual...
Loudspeaker Grille Horn/ High-Frequency Subassembly Figure 9: Removing the Horn from the Enclosure Grille Screw (x6) or (x8) Figure 8: Figure 10: Removing the Grille from Rotating the Horn to the Enclosure Desired Horn Pattern Electro-Voice® Tour X Owner’s Manual...
5. Reattach the grille using the (6 or 8) screws (reverse of Figure 8). Loudspeaker Grille Logo and Logo Spacer Logo Spacer Screw Figure 11: Figure 12: Removing the Screw from Rotating the Logo and Spacer to the back of the Grille the Desired Orientation Electro-Voice® Tour X Owner’s Manual...
(Bottom Skid Plate) Figure 13: Figure 14: Removing the (6) Screws from the Rear Attaching the TX-W1 and (6) Screws to the of a TX1181 or TX2181 (shown) Rear of a TX1181 or TX2181 (shown) Electro-Voice® Tour X Owner’s Manual...
68.7 lbs (31.2 kg) 105.8 lbs (48.0 kg) 88.0 lbs (40.0 kg) 139.0 lbs (63.1 kg) EBK-1 (5542930) Accessories: TX-W1 (ACC000043-000) TSP-1 (302053-000) EBK-1 (5542930) TX-W1 (ACC000043-000) (Part Number) PCL35 (301397-135) TSS-1 (302053-001) Half Space Measurement. Electro-Voice® Tour X Owner’s Manual...
Page 12
(440mm x 364mm x (475mm x 439mm x 573mm) 655mm) Net Weight: 43.7 lbs (19.8 kg) 51.9 lbs (23.5 kg) Shipping Weight: 49.2 lbs (22.4 kg) 59.4 lbs (27.0 kg) Accessories: (Part Number) Half Space Measurement. Electro-Voice® Tour X Owner’s Manual...
Loudspeaker Loudspeaker PCL35 PCL35 Pole Pole (Sold Separately) (Sold Separately) TX1181 TX1181 Loudspeaker Loudspeaker Amplifier From 30 Hz Mixer Figure 14a: (1) TX1122 (or TX1152) and (1) TX1181 per side, paralleled, on (1) Q99 Ampifier Electro-Voice® Tour X Owner’s Manual...
Page 14
Loudspeaker Loudspeaker Q1212 Amplifier DC-One Processor From Mixer TX2181 TX2181 Loudspeaker Loudspeaker Processor settings are available at www.electrovoice.com Figure 14b: (1) TX2152 and (1) TX2181 per side, on (2) Q1212 Amplifiers and (1) DC-One Processor Electro-Voice® Tour X Owner’s Manual...
TX1152FM or TX1152FM or TX1152FM or TX1152FM Loudspeaker Loudspeaker Loudspeaker Loudspeaker Recommended Microphones PL Series N/Dym Series Amplifier From 60 Hz Mixer Figure 14c: (4) TX1122FM’s (or TX1152FM’s) paralleled on (1) Q99 Amplifier Notes Electro-Voice® Tour X Owner’s Manual...