Drain Holes - Electro-Voice X-Line X1i User Manual

26 en | Designing an X12i-128 array
6.5

Drain holes

The X12i-128 fiberglass models have optional drain holes on the bottom of the enclosure. The
drain holes are designed to drain any water that may accumulate over time.
In applications where the X12i-128 is located in an environment with direct rain exposure,
Electro-Voice recommends that the drain holes are used.
Notice!
Opening the drain holes may cause minor air noises close to the subwoofer that will be
inaudible at normal listening distances.
2019.10 | V01 | F01U361103
A
A
B
x4
x6
1. Determine if the subwoofer(s) will be
angled upward (A), flat (B), or angled
downward (C).
2. Option A: remove the (4) M8 screws
towards the back of the subwoofer
enclosure.
3. Option B: remove all (6) M8 screws on
the bottom of the subwoofer enclosure.
4. Option C: remove the (2) M8 screws
towards the front of subwoofer
enclosure.
x2
User manual
X-Line Advance Install
Bosch Security Systems B.V.