Electro-Voice X-Line X1i User Manual page 28

28 en | Custom frame design considerations
Use all eight M10 structural hard points on
the loudspeaker element, four on each side of
the element.
Custom frame must be rigid between side
mounting points. Install lateral support bars
after the loudspeakers are mounted to the
frame sides to ensure they are tight to the
loudspeakers.
2019.10 | V01 | F01U361103
DO NOT use only some of the M10 hard
points.
DO NOT modify the loudspeaker to add a
custom hard point. Use only the M10 hard
points provided.
DO NOT use plates on each side of the array
without lateral support.
User manual
X-Line Advance Install
Bosch Security Systems B.V.