X-Line Advance Install
Use M10 fasteners that penetrate the
loudspeaker element 30 - 45 mm (1.2 - 1.8
in). Use thread locker and appropriate torque
for the type of fastener used. Fastener torque
must not exceed 13.5 N*m (120 in*lbs). Only
use fasteners that are capable of supporting
the weight of the loudspeaker with a safety
factor appropriate for local laws and
regulations.
The gap between the custom frame and the
enclosure must be less than 1.5 mm (0.06
in).
Bosch Security Systems B.V.
Custom frame design considerations | en
DO NOT use fasteners that are too long or
too short.
30mm
[1.2in]
DO NOT allow any gap between the
enclosure and the custom frame that exceeds
1.5 mm (0.06 in).
1.5mm
[<0.060in]
User manual
29
>1.5mm
>1.5mm
[>0.060in]
[>0.060in]
2019.10 | V01 | F01U361103