Problems During Startup - American Dynamics Intellex Intellex LT Reference And Troubleshooting Manual

Quick Reference Guide and Troubleshooting Guide
PROBLEM
Power indicator is
not lit.
Nothing displays
on the main
monitor.
Nothing displays
on the optional
video out monitor.
16

PROBLEMS DURING STARTUP

POSSIBLE CAUSES
No power to the unit.
Power switch not engaged.
Voltage switch not set
correctly.
No power to the monitor.
Monitor cable is not
properly connected.
Unit is not powered up.
No power to the optional
video out monitor.
Monitor cable is not
properly connected.
SUGGESTED ACTION
Make sure the power cord is
correctly connected to the
unit.
Make sure power is available
at the supply outlet.
Insert a paper clip into the
pinhole below the power
indicator to turn on unit
power.
Set voltage switch to correct
voltage: 115 or 230.
Make sure the power cord is
connected to the monitor
correctly and the switch is
turned on.
Make sure the monitor cable
is connected to the correct
VGA OUT connector on the
rear panel.
Power up the unit.
Make sure the power cord is
connected to the monitor
correctly and the switch is
turned on.
Make sure the video cable for
the optional video out
monitor is connected to the
Video Out connector on the
rear panel.
Troubleshooting Guide