American Dynamics Intellex Intellex LT Reference And Troubleshooting Manual page 15

Verifying Data Recording
To verify data has been recorded, playback the video from the associated camera.
Click on the "A" button to open the text display window. The text stream name
should be in the box at the bottom of the text window.
NOTE: The text stream name is not displayed in this box until some text data is
actually recorded. You should be able to use the image playback controls
and/or the text scroll controls to see the text data. It is a good idea to restart
the Intellex and verify that it is still recording on the same ports. You do not
want a power failure or watchdog timer reset to result in lost data after
restarting.
Port Expander Indicators
The front of the port expander has an illuminated indicator that is used to display
status. The display states are:
Green (slowly flashing)
Amber (steady or flashing)
Red
Intellex Speakers-RDVSPK01
The Intellex Speakers can be used to listen to recorded audio information or to
monitor live audio activity.
Follow the directions provided with the speakers to connect the speakers together and
to the power source. Then insert the mini phone plug into the green audio output jack
on the rear of the Intellex. Use the Audio Setup functions in Intellex to adjust the
volume as required.
Quick Reference Guide
Intellex® LT Digital Video Management System
USB connection to the Intellex unit has been
established. No serial data being recorded.
Serial data is being sent to the Intellex unit.
USB error. Expander is not ready to send
data to the Intellex unit.
13