Save the LAN settings by clicking the Save button. Alternatively, clear the
settings by clicking the Reset button.
7.5.2. Wireless settings
Modifying the wireless settings
IMPORTANT
If the Cisco FM4500 Mobi was purchased in the USA or
Canada, the Country selection is set to the country of
purchase, and the Country: drop-down will be disabled.
The WIRELESS RADIO window contains controls to change the following
settings:
• The shared network passphrase.
• The national territory in which the wireless network is installed.
• The operational radio frequency and bandwidth settings.
To change the Wireless Settings, do the following steps:
1.
Click the -wireless radio link under GENERAL SETTINGS in the
left-hand settings menu.
• The WIRELESS RADIO dialog will be shown
(page
Figure 25. Configurator GUI (Wireless Radio dialog)
2.
Enter a defined network passphrase in the Shared Passphrase
field.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
67)).
(Figure 25
Page 67 of 174