7.
Upload the *.CSV file to the unit by clicking the Choose File
button in the Upload Plug-ins CSV section
153)) and following the software prompts.
Figure 72. MANAGE PLUG-INS DIALOG (Upload Plug-ins
CSV section)
• The chosen *.CSV file will be listed to the right of the
Choose File button.
8.
Click the Upload button.
• The plug-ins will be uploaded to the unit and activated, and
the relevant functionality can be used.
8.2.5. Sharing License codes and accepting shared License codes
If needed, you can share license codes with other Fluidmesh device
users, and also have other Fluidmesh device users share their license
codes with you.
To share one or more license codes with another Fluidmesh device user,
do the steps that follow:
1.
Log on to the
2.
Click the Plug-ins link.
• The Plug-ins web page will be shown.
3.
Check the selection check-boxes to the left of the plug-ins that
must be shared.
4.
Click the Share button in the upper left-hand corner of the Plug-
ins web page
Figure 73. Plug-ins web page (Share button)
• The Share License Codes dialog will be shown.
© 2021 Cisco and/or its affiliates. All rights reserved.
Fluidmesh Partner
Portal.
(Figure 73 (page
153)).
Software Plug-Ins
(Figure 72 (page
Page 153 of 174