Unit Function And Throughput Speed; Data Throttling; Mpls Protocol; Unit Configuration - Cisco FM4500 Mobi Installation And Configuration Manual

Ultra-reliable wireless backhaul
Hide thumbs Also See for FM4500 Mobi:
Table of Contents

Advertisement

Unit function and throughput speed

The unit is designed to handle mission-critical video, voice, and data with
extremely high reliability. It can be used to create point-to-point or mesh
network links, with real throughput of up to 500 Mbps to vehicles travelling
at up to 225 mph (360 Km/h), under optimal wireless link conditions.

Data throttling

The unit's FluidThrottle functionality allows you to specify the maximum
amount of data throughput the unit will be required to handle at any time.
The unit's throughput capacity can be upgraded to different levels using
software plug-ins.

MPLS protocol

Two different Multi-Protocol Label Switching (MPLS)-based protocol
versions can be chosen. If a newer network is being built or upgraded, the
advanced Prodigy 2.0 protocol can be selected to boost performance. If
an older network incorporating Fluidmesh components is being upgraded,
the Prodigy 1.0 protocol with limited functionality can be selected to
guarantee compatibility. Prodigy uses a traffic optimization algorithm that
allows every Fluidmesh radio to assign a specific priority level to every
forwarded data packet.

Unit configuration

The unit is compatible with Fluidmesh RACER™. This is a centralized,
web-based interface that allows you to configure, monitor, and
troubleshoot the unit (and in certain cases, the entire wireless network) in
real time, without the need for any offline software. In cases where an
initial connection cannot be made to the internet, the unit can be
configured using a built-in offline Configurator interface.

Environmental rating

The unit is certified for outdoor usage, equipped with vibration-proof
connectors, and designed for fast installation and enhanced reliability in
harsh environments.

Product specifications

For detailed product specifications, refer to the product data sheet for the
Cisco FM4500 Mobi.

Transceiver and gateway unit power consumption

In service, Fluidmesh transceiver units and gateway units consume
electrical power at the rates given in the table below.
© 2021 Cisco and/or its affiliates. All rights reserved.
Getting Started
Page 13 of 174

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fm1200 voloFm1200v-hwFm4500f

Table of Contents