Setup
Selecting Unit
Location
CAUTION
WARNING
Environmental
Factors
This chapter describes the setup procedure for the UX 410 in the following
sections:
•
Selecting Unit Location
•
Unpacking the Shipping Carton
•
Examining Device Features
•
Finding ARS and Service Switches
•
Mounting the Antenna Unit
•
Mounting the Controller Unit
•
Connecting the Antenna Unit to the Controller Unit
•
Installing or Replacing SAM Cards
•
Connecting Cables
•
Connecting Power Supply
•
Using the Reader
Use the following guidelines when selecting a location for the UX 410:
•
Select a location convenient for the customer.
•
Avoid dusty, hot or damp locations.
•
Choose the Antenna Unit location near the Controlling Unit for ease in setup
and troubleshooting.
Avoid placing metallic objects at the front and around the card reader.
For safety, do not string cables or cords from your installation cabinet or housing
across a walkway.
The front panel of the device is dustproof and fade-proof. The UX 410 is also
water-resistant, in accordance with IP65 ratings.
C
HAPTER
UX 410 I
G
NSTALLATION
UIDE
2
9