Setup
Select Location
Ease of Use
Environmental
Factors
CAUTION
This chapter describes the setup procedure for PINpad 1000
following sections:
•
Select Location
•
Unpack Shipping Carton
•
Examine Unit Features
•
Connect Unit to Controller
•
Connect Unit to a PC/AT (optional)
•
Use Stand Adapter
•
Use Privacy Shield
•
Use Unit
Use the following guidelines to select the best location for the PINpad 1000
unit.
•
Select a location convenient for both merchant and cardholder.
•
Select a flat support surface, such as a countertop or table.
•
Select a location near a power outlet and the terminal or computer connected
to the PINpad 1000
walkway.
•
Do not use the unit where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
•
Keep the unit away from direct sunlight and anything that radiates heat, such
as a stove or a motor.
•
Do not use the PINpad 1000
The PINpad 1000
unit is not waterproof or dustproof, and is intended for indoor
SE
use only. Any damage to the unit from exposure to rain or dust can void any
warranty.
unit. For safety, do not string cables or cords across a
SE
unit outdoors.
SE
C
HAPTER
units, in the
SE
PIN
1000SE I
PAD
NSTALLATION
2
SE
9
G
UIDE