Using The Special Functions; Continuous Original Feeding / Single Original Feeding - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

1. CONTINUOUS ORIGINAL FEEDING / SINGLE ORIGINAL FEEDING

When using the optional reversing automatic document feeder, you can select the continuous feed
1
mode (default setting) where multiple (or single) originals are continuously fed in one by one, or the
single-feed mode where if you insert an original, it is automatically pulled in and starts being copied.
2
1 Place paper in the cassette(s).
3
2 Place the original(s).
- Maximum number of originals that can be set
4
3 Press the PROGRAM key to enter the programme
menu, and press the ADF key.
5
6
4 Press the ADF key.
7
8
9
Select other copy modes as required.
5
Press the
10
11
When the number of originals is too large to be set at one
time, you can divide the originals into two to four sets and set
them one after another. To do so, place the last set of originals
first, and press the CONTINUE key while the scanning is in
progress. After they have been scanned, place the previous
12
set of originals.
6-2

USING THE SPECIAL FUNCTIONS

Continuous Feed Mode
Page 2-9
START key.
Page 2-4
Page 2-9