Installation Guidelines - Alvarion BreezeACCESS 900 System Manual

Chapter 2 - Installation

Installation Guidelines

This section describes the installation guidelines and the various
considerations that must be taken into account when planning the
installation.
Location of the Unit
The unit can be placed on a desktop or a shelf, or can be attached to
a wall.
The unit should be installed as near as possible to the antenna. The
RF cable connecting the unit to the antenna should be as short as
possible to guarantee minimum power loss.
The location of the Subscriber Unit should take into account its
connection to a power outlet and the user's data equipment.
Keep the units well away from sources of heat, such as radiators,
air-conditioners, etc.
Location of the Antenna
The antenna should be installed where it can be directed towards
the location of the Access Unit. Any physical object in the path
between the unit and the Access Unit other than foliage should be
avoided. Any buildings or other physical structure such as hills or
other natural geographic features higher than the antenna and
situated in the path between the two sites can constitute
obstructions.
Outdoor Antenna: The outdoor antenna should be pole mounted on
the rooftop or on a sidewall.
WARNING
It is the responsibility of the professional installer to ensure that when using the
outdoor antenna kit, that only this antenna provided with the subscriber unit is
used along with the minimum cable lengths provided. The use of any antenna
other than those listed is expressly forbidden in accordance to FCC rules CFR47
part 15.204.
2-22
BreezeACCESSS 900 System Manual