The BS-PS-AC
The BS-PS-AC is an AC to DC converter that provides power to all the
modules installed in the BS-SH chassis.
The BS-PS-AC provides a power input connector (marked AC IN) for
connecting the AC power cable to the mains.
The ON/OFF power switch controls the connection of the mains power
to an AC to DC converter.
WARNING
If two power supply modules are used in the same chassis for redundancy, both
power supplies must be of the same type. Do not use a mix of AC and DC power
supply modules in the same chassis.
Manual Revision 1.0
Installing the Stand-Alone AU/ Modular Base Station Equipment
Figure 2-7: BS-PS-AC Front Panel
2-15