Table of Contents
Advertisement
7.
Disconnect the two optical fiber cables from the optical connector assembly.
Bosses
Bracket
Holes
Note
• When installing the bracket, fit the four bosses with the four holes.
• When connecting an optical cable, not to mistake the orientation of the optical connector assembly and the
cable connecting position.
8.
Install the removed parts by reversing the steps of removal.
HXCU-FB70
Boss
Neutrik fiber cap
Optical connector
assembly
Rear panel
"2"
"1"
Optical fiber cables
K3 x 6
PSW3 x 6
Optical connector assembly
"NEUTRIK"
5-12
Advertisement
Table of Contents
