Table of Contents
Advertisement
5-14.
DPR-337F Board
Preparation
1.
Remove the top cover. (Refer to
2.
Remove the AT-191 board. (Refer to
3.
Remove the CN-3556 board. (Refer to
4.
Remove the CN-3583 board. (Refer to
Procedure
1.
Remove the four screws (PSW3 x 6) to detach the AT bracket.
2.
Remove the two attached hexagon screws, four screws (2.6 x 6), three screws (PSW3 x 6) and the two screws (BTP3
x 10) to detach the nut plate and the DPR-337F board.
PSW3 x 6
DPR-337F board
3.
Install the removed parts by reversing the steps of removal.
HXCU-FB70
"5-1. Top
Cover")
"5-8. AT-191 Board/Lithium
"5-10. CN-3556
Board")
"5-13. CN-3583
Board")
PSW3 x 6
AT bracket
Battery")
Nut plate
PSW3 x 6
BTP3 x 10
Attached
hexagon screws
2.6 x 6
PSW3 x 6
5-17
Advertisement
Table of Contents
