Table of Contents
Advertisement
5-17.
SW-1572 Board
Preparation
1.
Remove the top cover. (Refer to
2.
Remove the front panel assembly. (Refer to
Procedure
1.
Remove the five knob assembles (S), volume assembly knob (small), and volume assembly knob (large).
Knob assembles (S)
Volume assembly knob (small)
2.
Disconnect the flexible flat cable (10 core) from the connector (CN4) on the SW-1572 board.
3.
Disconnect the harness from the connector (CN1) on the SW-1572 board.
4.
Remove the eight screws to detach the SW-1572 board.
HXCU-FB70
"5-1. Top
Cover")
"5-2. Front Panel
Volume assembly knob (large)
Assembly")
5-20
Advertisement
Table of Contents
