Sony SRG-300SE Service Manual page 46

Version Upgrade
1. Click the information display of this unit, and then click the [Network] button.
The Device Account screen is displayed.
2. Type "admin" in "Administrator name" and "Administrator password" respectively, and then click the
[OK] button.
The Network Setting screen is displayed.
3. Check the "Use the following IP address" radio button, type IP address and Subnet mask as follows,
then click the [OK] button.
IP address: 192.168.0.100
Subnet mask: 255.255.255.0
2-14 (E)
"Administrator name" and
"Administrator password"
[OK] button
Check the radio button.
"IP address" and "Subnet mask"
[OK] button
SRG-300SE/301SE