Sony SRG-300SE Service Manual page 43

Writing of serial number
1. Click the [START] button.
The device is automatically connected to the this unit, and then the model information is displayed in
the Model Information box.
2. Confirm the model name (Model:) and MAC address (Mac:) in the Model Information box.
The MAC address should be the same as the MAC address label supplied with the SY-437 board.
3. Type the serial number of this unit and select the destination.
n
Select the destination according to the model.
SRG-300SE: WW
SRG-301SE: CN
Destination [OK] button
n
Once you write the serial number and destination, you cannot change it. Be extremely careful in the
writing of serial number as well as the confirmation of model name and MAC address.
SRG-300SE/301SE
Model Information box
Serial number
2-11 (E)