Sony NEX-3A Servise Manual
Interchangeable lens digital camera
Hide thumbs
Also See for NEX-3A:
- Service manual (49 pages) ,
- Instruction manual (82 pages) ,
- Function manual (7 pages)
Table of Contents
Advertisement
Quick Links
NEX-3A/3D/3K/5A/5D/5K/5CK/5H
SERVICE MANUAL
Ver. 1.2 2010.07
Revised-2
Replacement of the
previously issued
SERVICE MANUAL
9-852-797-32 with
this manual.
SERVICE NOTE (Check the following note before the service.)
– ENGLISH –
1-1.
PRECAUTION ON REPLACING THE SY-258 BOARD
1-2.
PRECAUTION ON REPLACING THE CABINET FRONT
– JAPANESE –
1-1.
SY-258基板交換時の注意
1-2.
前キャビネッ ト交換時の注意
[About the service of this model]
NEX-3A/5A is a commodity that packed the Interchangeable Lens Digital Camera (NEX-3/5) and Interchangeable Lens (E 16mm F2.8).
NEX-3D/5D is a commodity that packed the Interchangeable Lens Digital Camera (NEX-3/5) and Interchangeable Lens
NEX-3K/5K/5CK is a commodity that packed the Interchangeable Lens Digital Camera (NEX-3/5/5C) and Interchangeable Lens
NEX-5H is a commodity that packed the Interchangeable Lens Digital Camera (NEX-5) and Interchangeable Lens (E 18-200mm F3.5-6.3 OSS).
Refer to each following service manual the Interchangeable Lens kit, when you repair.
• Interchangeable Lens
SEL16F28 (E 16mm F2.8) Service Manual (9-852-798-1[])
SEL1855 (E 18-55mm F3.5-5.6 OSS) Service Manual (9-852-799-1[])
SEL18200 (E 18-200mm F3.5-6.3 OSS) Service Manual (9-834-507-1[])
The components identified
Les composants identifiés par
by mark 0 or dotted line with
une marque 0 sont critiques
mark 0 are critical for safety.
pour la sécurité.
Replace only with part number
Ne les remplacer que par une
specified.
pièce portant le numéro spécifié.
NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2
9-852-797-33
A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED
Canadian Model
Australian Model
Japanese Model
Photo: NEX-5/Black
(E 16mm F2.8 / E 18-55mm F3.5-5.6 OSS).
(E 18-55mm F3.5-5.6 OSS).
INTERCHANGEABLE LENS DIGITAL CAMERA
Ver.
Date
2
LEVEL
1.0
2010.05
1.1
2010.07
US Model
AEP Model
UK Model
1.2
2010.07
E Model
Chinese Model
Korea Model
Tourist Model
Sony Corporation
Revision History
History
Contents
Official Release
—
Revised-1
• Correction of Model Name
(A1 10-085)
• Correction of Repair Parts List
• Correction of Accessories
S.M. revised: Top cover,
Page
2-4, 2-6, 2-7, 2-9, 2-10, 2-11, 2-15, 2-18,
2-22,
2-23
Revised-2
• Addition of Model Name
(A2 10-087)
• Change of Model information table
• Change of Repair Parts List
• Change of Checking supplied accessories.
• Change of ASSEMBLY
S.M. revised: Top cover,
Page 3, 2-1, 2-3, 2-4, 2-5, 2-6, 2-7, 2-8, 2-9,
2-10, 2-11, 2-17, 3-2, 3-3, 3-4
985279733.pdf
S.M. Rev.
issued
—
Yes
Yes
2010G29-1
© 2010.07
Published by Sony Techno Create Corporation
Advertisement
Table of Contents
Related Manuals for Sony NEX-3A
Summary of Contents for Sony NEX-3A
-
Page 1: Revision History
前キャビネッ ト交換時の注意 [About the service of this model] NEX-3A/5A is a commodity that packed the Interchangeable Lens Digital Camera (NEX-3/5) and Interchangeable Lens (E 16mm F2.8). NEX-3D/5D is a commodity that packed the Interchangeable Lens Digital Camera (NEX-3/5) and Interchangeable Lens (E 16mm F2.8 / E 18-55mm F3.5-5.6 OSS). -
Page 2: Specifications
Audio: MPEG-4 AAC-LC 2ch drive NEX-3/3C: Total number of dots: 921 600 (640 × 3 Movie: MPEG-4 Visual (RGB) × 480) dots USB communication: Hi-Speed USB [Input/output terminals] (USB 2.0 compliant) USB: miniB HDMI: HDMI type C minijack NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 – 2 – A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... - Page 3 Ver.1.2 2010.07 The changed portions from Ver.1.1 are shown in blue. Model information table Model NEX-3A NEX-3D NEX-3K US, CND, AEP, UK, E, KR, US, CND, AEP, UK, E, AUS, Destination AEP, UK, E, AUS, KR, J J, JE KR, J...
-
Page 4: Exterior Parts
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO- CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM- NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT サービス，点検時には次のことにご注意ください。... -
Page 5: Service Note
Replace to the IM Adjust Washer with the thickness equal to the difference of dimensions 交換前の寸法 （A+B） － 交換後の寸法 （B） を行い、差分寸法分のIM調整ワッシャへ交換してください。 (distance before replacement (A+B) - distance after replacement (B)). (6) 組立完成後、試し撮りを行い周辺ボケが無いか確認してください。 (6) After assembly, take a test shot to check if there is any blur at circumference of the image. NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 1-1E A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... -
Page 6: Repair Parts List
• IS-076 Flexible Board 9�Tripod Screw qs�Cabinet Front Assy [Disassembly] Table 2-1 [Exploded View] Screw's • Cabinet Front Section-1 Cabinet's Color • Cabinet Front Section-2 Ref. No. (Parts Color.) #201 (Silver), #202 (Silver) SILVER #196 (Black), #200 (Black) BLACK Link ACCESSORIES ASSEMBLY NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... -
Page 7: Note For Repair
いように注意する。 場合もあるので注意してください） • When remove a connector, do not pull at wire of connector. It is possible that a wire is snapped. • コネクタを取り外す時に，線材部 （極細） を持って引っ張ると断 線する恐れがありますので，絶対に線材部 （極細） を持って引っ • When installing a connector, do not press down at wire of connector. 張らないでください。 It is possible that a wire is snapped. • 線材部 （極細） を押さえながらコネクタを差し込むと，線材部 （極 • Do not apply excessive load to the gilded flexible board. 細） が断線する恐れがありますので，絶対に線材部 （極細） には負 担をかけないでください。 • 金メッキされているフレキシブル基板には，強い負担をかけな いでください。 NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... - Page 8 SPECIAL (M1.4 (D2.75)) (SILVER) (Note3) 4-186-478-11 GRIP (REAR), SILVER (SILVER) #202 4-178-124-31 SPECIAL (M1.4 (D2.75)) (SILVER) (Note3) Note2: Refer to “Assembly-1: Method of attachment of Cabinet (Rear) Note2: 組立時は “Assembly-1: Method of attachment of Cabinet 4-186-479-01 SHEET, GRIP (REAR) ADHESIVE Assy” when you assemble. (Rear) Assy” を参照してください。 4-186-476-01 SHAFT, BT LID NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED...
-
Page 9: Lcd Section
SCREW (M1.4), NEW, TRUSTAR, P2 A-1773-793-A FP-1237 FLEXIBLE BOARD, COMPLETE #187 3-234-449-05 SCREW (M1.4) * 57 4-186-555-01 LIGHT (LC), GUIDE, #196 4-178-124-01 SPECIAL (M1.4 (D2.75)) (BLACK) (Note4) 4-186-572-02 INSULATING SHEET A (SY) (Note3) #201 4-178-124-21 SPECIAL (M1.4 (D2.75)) (SILVER) (Note4) NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... -
Page 10: Main Board Section
* 102 4-186-561-01 GROUND PLATE (L), TOP * 103 4-186-560-01 GROUND PLATE (G), BOTTOM 3-208-537-01 0+Z M1.4X2 NEW TORASUTA 4-186-573-01 INSULATING SHEET B (SY) (Note1) #192 4-188-736-01 SCREW (TP1.4), P2 A-1782-475-A SY-258 BOARD, COMPLETE (SERVICE) 4-187-240-01 SHEET (SY), RADIATION NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... - Page 11 Note10: 組立時は “Assembly-33: LC Connector Insulating Sheet put- putting position” when you assemble. ting position” を参照してください。 (including CP001 (CMOS imager) and IS-077 complete board) (Note7, 9) #200 4-178-124-11 SPECIAL (M1.4 (D2.75)) (BLACK) (Note8) A-1774-556-A BUTTON BLOCK ASSY, RL #202 4-178-124-31 SPECIAL (M1.4 (D2.75)) (SILVER) (Note8) NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED...
-
Page 12: Imager Block Section
#197 4-185-990-01 MB SCREW, CHARGE UNIT FIXED * 204 Selection Parts IM WASHER (B), ADJUST (Note1, 2) * 205 Selection Parts IM WASHER (A), ADJUST (Note1, 2) 4-185-968-02 MB TAPE, MASK SHEET (Note3) 4-185-966-01 MB SHEET, MASK (Note3) NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... -
Page 13: Cabinet (Front) Section
* 260 4-186-524-01 RETAINER, PW KNOB * 261 4-196-544-01 TAPE (AS (210)) (Note3) * 256 4-186-528-01 RING, PW ORNAMENTAL (BLACK) * 256 4-186-528-11 RING, PW ORNAMENTAL (SILVER) #155 3-080-204-31 SCREW, TAPPING, P2 * 257 4-186-530-01 KNOB, PW (BLACK) NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... - Page 14 SCREW, TAPPING, P2 2-662-396-11 SCREW (M1.4), NEW, TRUSTAR, P2 4-186-521-11 GRIP (SILVER) #191 4-188-735-01 SCREW (M1.7) * 310 4-186-519-01 WINDOW (IR) #195 3-197-324-01 M1.7X2.5X3GF (D4X0.5) 4-186-542-01 SHEET, GRIP ADHESIVE #198 4-186-545-01 M1.7X4 SPIN 4-186-517-01 CABINET (FRONT) (BLACK) (Note3) NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED...
-
Page 15: Main Frame Section
#192 4-188-736-01 SCREW (TP1.4), P2 * 356 4-186-565-01 BASE (G), STRAP (BLACK) #196 4-178-124-01 SPECIAL (M1.4 (D2.75)) (BLACK) (Note2) * 356 4-186-565-11 BASE (G), STRAP (SILVER) #201 4-178-124-21 SPECIAL (M1.4 (D2.75)) (SILVER) (Note2) 4-186-438-01 PLATE, BT LOCK NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 2-10 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... -
Page 16: Imager Unit Section
IS-076 FLEXIBLE BOARD 4-193-875-01 CUTTER, IM FLARE (S) 4-185-993-01 IM SHEET, SPACER 2-662-396-11 SCREW (M1.4), NEW, TRUSTAR, P2 #191 4-188-735-01 SCREW (M1.7) 4-194-127-01 IM TAPE, SPACER FIXED (S) * 407 4-186-454-01 RADIATION SHEET (IS) (Note3) J-6082-737-A J-6082-737-A NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 2-11 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED... - Page 17 IDENTIFYING PARTS (ENGLISH) When indicating parts by reference number, please include the board name. Follow the disassembly in the given numerical order. NOTE: The components identified by mark 0 or (NEX-3A/3D/3K) • -XX, -X mean standardized parts, so they may have some differences from the original one. dotted line with mark 0 are critical for safety. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay Replace only with part number specified. should be anticipated when ordering these items. Les composants identifiés par une marque • The mechanical parts with no reference number in the exploded views are not supplied. 0 sont critiques pour la sécurité. • Due to standardization, replacements in the parts list may be different from the parts specified Ne les remplacer que par une pièce portant in the diagrams or the components used on the set. le numéro spécifié. • Color Indication of Appearance Parts Example: (SILVER) : Cabinet’s Color...
- Page 18 いように注意する。 場合もあるので注意してください） • When remove a connector, do not pull at wire of connector. It is possible that a wire is snapped. • コネクタを取り外す時に，線材部 （極細） を持って引っ張ると断 線する恐れがありますので，絶対に線材部 （極細） を持って引っ • When installing a connector, do not press down at wire of connector. 張らないでください。 It is possible that a wire is snapped. • 線材部 （極細） を押さえながらコネクタを差し込むと，線材部 （極 • Do not apply excessive load to the gilded flexible board. 細） が断線する恐れがありますので，絶対に線材部 （極細） には負 担をかけないでください。 • 金メッキされているフレキシブル基板には，強い負担をかけな いでください。 NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 2-13 A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED...
- Page 19 Note3: Refer to “THE COMBINATION OF CABINET’S COLOR Note3: キャビネット色とネジの組合わせについては，2 - 12 ページ 4-190-793-11 GRIP (210), (REAR) (SILVER) AND SCREW (NEX-3A/3D/3K)” on page 2-12 about the の “THE COMBINATION OF CABINET’ S COLOR AND SCREW 4-190-793-21 GRIP (210), (REAR) (RED) 2-635-562-31 SCREW (M1.7) (RED, BLACK) (Note3, 4)
- Page 20 #187 Note4: Refer to “THE COMBINATION OF CABINET’S COLOR Note4: キャビネット色とネジの組合わせについては，2 - 12 ページ AND SCREW (NEX-3A/3D/3K)” on page 2-12 about the の“THE COMBINATION OF CABINET’S COLOR AND SCREW combination of cabinet’s color and screw. (NEX-3A/3D/3K)”を参照してください。 (Note5) Note5: Refer to “Assembly-4: LC Flexible Insulating Sheet putting Note5: 組立時は“Assembly-4: LC Flexible Insulating Sheet putting...
- Page 21 (NEX-3A/3D/3K)” を参照してください。 5� Note4: Refer to “THE COMBINATION OF CABINET’S COLOR Note4: キャビネット色とネジの組合わせについては，2 - 12 ページ AND SCREW (NEX-3A/3D/3K)” on page 2-12 about the の “THE COMBINATION OF CABINET’ S COLOR AND SCREW combination of cabinet’s color and screw. (NEX-3A/3D/3K)” を参照してください。 (Note3) Ref. No.
- Page 22 Danger of explosion occurs if battery is incorrectly replaced. Replace only 電池の交換は，正しく行わないと破裂する恐れがあります。電池を交 Note10: Refer to “THE COMBINATION OF CABINET’S COLOR with the same or equivalent type. Dispose of used batteries according Note10: キャビネット色とネジの組合わせについては，2 - 12 ページ 換する場合には必ず同じ型名の電池又は同等品と交換してください。 AND SCREW (NEX-3A/3D/3K)” on page 2-12 about the to the instructions. の “THE COMBINATION OF CABINET’ S COLOR AND SCREW 使用済み電池は，取扱指示に従って処分してください。 combination of cabinet’s color and screw. (NEX-3A/3D/3K)” を参照してください。 Note1: Refer to “Assembly-17: Note on Alignment of the Flexible Note1: 組...
- Page 23 Description Ref. No. Part No. Description 0 201 A-1773-803-A MB CHARGE UNIT #148 3-057-082-21 SCREW (M1.7), NEW TRU-STAR, P2 (NEX-3A/3D/3K) 0 202 1-487-619-11 SHUTTER UNIT (H094) #191 4-188-735-01 SCREW (M1.7) * 203 Selection Parts IM WASHER (C), ADJUST (Note1, 2)
- Page 24 2-2-6. CABINET FRONT SECTION Screw (NEX-3A/3D/3K) #23: M1.7 X 4.0 (Tapping) #148: M1.7 X 3.0 #195: M1.7 X 2.5 #198: M1.7 X 4.0 #199: M1.7 X 3.0 ns: not supplied (Black) (Silver) (Silver) (Silver) (Black) 3-080-204-11 3-057-082-21 3-197-324-01 4-186-545-01 4-195-871-01 (Note3) Note (Note5) Note1: Refer to “Assembly-27: Apply grease on MB N Plate SP”...
- Page 25 Note1: 組立時は “Assembly-8: Shaft Cushion (MF) putting position” when you assemble. を参照してください。 Note2: Refer to “THE COMBINATION OF CABINET’S COLOR Note2: キャビネット色とネジの組合わせについては，2 - 12 ページ AND SCREW (NEX-3A/3D/3K)” on page 2-12 about the の “THE COMBINATION OF CABINET’ S COLOR AND SCREW combination of cabinet’s color and screw. (NEX-3A/3D/3K)” を参照してください。 (Note1)
-
Page 26: Sy Holder Section
2-2-8. SY HOLDER SECTION Note (NEX-3A/3D/3K) Note1: Refer to “Assembly-6: Method of attachment of BT Lid Assy” Note1: 組立時は “Assembly-6: Method of attachment of BT Lid Assy” ns: not supplied when you assemble. を参照してください。 (Note1) Ref. No. Part No. Description Ref. No. Part No. Description X-2548-275-1 HOLDER ASSY, SY (210B) (BLACK) X-2548-295-1 COVER ASSY (210W), HDMI (WHITE) - Page 27 Note3: Refer to “Assembly-30: Prior Insertion of IS-075 Flexible IM Flare Cutter Note3: 組立時は“Assembly-30: Prior Insertion of IS-075 Flexible Optical Filter Block 光学フィルタブロック Board (NEX-3A/3D/3K)” when you assemble. Board (NEX-3A/3D/3K)”を参照してください。 (3) Set the Optical filter block in its attachment jig (3) 貼り付けたIM間隔板固定テープが上になるように、光学 Note4: Refer to “Assembly-31: Radiation Sheet (IS) putting position” Note4: 組立時は“Assembly-31: Radiation Sheet (IS) putting position” (J-6082-737-A), with the attached IM spacer fixed tape フィルタブロック貼付け治具(J-6082-737-A)にセットする。...
-
Page 28: Selection Parts
(Only for destination Japanese model) CD-ROM 日本国内については日本語のみが印刷での部品供給可能です。 - Application Software for α camera - α Handbook α Handbook (PDF) 4-183-855-01 (JAPANESE) * 4-189-192-31 (PERSIAN) NEX-3A/3D/3K * 4-183-855-11 (ENGLISH) * 4-189-192-41 (KOREAN) 4-191-926-01 * 4-183-855-21 (FRENCH) * 4-189-192-51 (POLISH) * 4-183-855-31 (ITALIAN) * 4-189-192-61 (CZECH) - Page 29 FP-1237 Flexible Complete Board LC Flexible Insulating Sheet assembling the exterior parts putting position (NEX-3A/3D/3K) Open the LCD as shown below. Before assembling Frame Assy, temporally secure FP-1237 Flexible Complete Board. Tighten the four screws in sequence of 1 to 4 as shown below.
- Page 30 Assembly-17: Note on Alignment of the Flexible Board putting position (NEX-5A/5D/5K/5CK/5H) putting position when assembling SY Holder Block Assy (NEX-3A/3D/3K) LC Flexible Insulating Sheet Insert Gasket (MS) between BT Frame Assy and NEX-5A/5D/5K/5CK/5H CN-439 Complete Board without evagination. Without running on the...
- Page 31 Assembly-20: Routing of Microphone Harness Assembly-22: Radiation Sheet (CN) (210) Assembly-24: Method of attachment of MB Mask Sheet Assembly-26: BT Slider Sheet (horizontal) (NEX-3A/3D/3K) putting position putting position (NEX-3A/3D/3K) Note: There should not be any misalignment when attaching (NEX-5A/5D/5K/5CK/5H) Cabinet (Upper) Assy MB Mask Sheet.
- Page 32 Assembly-28: MB N Contact Unit holding position Assembly-30: Prior Insertion of IS-075 Flexible Board Assembly-32: How to handle the Shutter Flexible Board Assembly-35: Method of attachment of LC Flexible (NEX-3A/3D/3K) (NEX-3A/3D/3K) Insulating Sheet (NEX-3A/3D/3K) Insert IS-075 Flexible Board into the connector on SY-258 Complete Board IM Imager Unit 14M, then lock the connector.
-
Page 33: Cleaning Procedure Of Olpf
* Do not slide from right to left or up and down while dabbing. 4. Wait until the tip will be dried completely. Cleaning Jig (J-6082-635-A) 1 Souse the cleaning cloth in ethyl alcohol. 2 The dry cleaning cloth. NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2 3-5E A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED...