Event Log; 2.2.11 Indications - Honeywell MAXPRO MPIP2000U Series Installation And Setup Manual

Installation and Setup Guide

2.2.10 Event Log

The event log is available on the keypad and in MAXPRO Cloud. For an
overview of the events, see Events on page 147.
The system stores the events log in the control panel memory. You cannot
delete the events log.
The system copies the required events into separate tables. You can view the
content of these tables using the Export Log feature in MAXPRO Cloud. This
feature is available from the control panel's Overview page:
For mandatory intrusion and hold-up events, export BURG EVENT LOG.
l
For communication events, export SPT LOG.
l
The system retains a minimum of 1500 events for intrusion and hold-up
events, and a minimum of 1000 events for communication events. Due to
buffering there will often be more events in the exported file.

2.2.11 Indications

MAXPRO Intrusion provides indications such as messages, beeps and other
sounds on the keypad and sounders. The system displays or annunciates the
indication as the initiating event occurs.
18
Honeywell MAXPRO Intrusion MPIP2000U/3000U Series
800-23044 Rev. A draft_11