Partition List Service Action - Sony LIB-D81 Product Description Manual

8.10.3. PARTITION LIST service action

The AVAILABLE DATA area indicates the following number of data bytes.
Even if the application does have sufficient space to accept this data, the
AVAILABLE DATA area information is not changed.
The autoloader reports a 2-byte ATTRIBUTE ID for each valid Attribute.
Bit 7 6
Byte
0 (MSB)
3
4
5
6
7
8
9
Table 8.10.2.2 : Parameter data for ATTRIBUTE LIST service action
ID Attribute Name
0401h MEDIUM SERIAL NUMBER
0408h MEDIUM TYPE
0409h MEDIUM TYPE INFOMATION
Table 8.10.2.3 : Medium Common Attributes
This service action returns the number of Partitions supported by the autoloader
for the specified VOLUME NUMBER. The CDB PARTION NUMBER and
FIRST ATTRIBUTE ID area are ignored. The following table shows the format
of the information reported by the autoloader as a result of this service action.
Bit 7 6
Byte
0 (MSB)
1
2
3 NUMBER OF PARTTIONS AVAILABLE(01h)
Table 8.10.3.1 : Parameter data for PARTITION LIST service action
The AVAILABLE DATA area indicates the number of bytes in the data that
follows it. Even if the application does not have sufficient space to accept this
data, the AVAILABLE DATA area value is not changed.
FIRST PARTITION NUMBER indicates the first valid PARTITION in the
specified VOLUME NUMBER.
NUMBER OF PARTITION AVAILABLE indicates the number of valid
PARTITIONs in the specified VOLUME NUMBER.
5 4 3
AVAILABLE DATA(6)
MEDIUM SERIAL NUMBER(0401h)
MEDIUM TYPEz(0408h)
MEDIUM TYPE INFOMATION(0409h)
5 4 3
AVAILABLE DATA(2)
FIRST PARTITION NUMBER(0h)
2 1 0
(LSB)
#Byte Format
32 ASCII
1 Binary
2 Binary
2 1 0
(LSB)
100
Chapter 8 SCSI Commands