Sony LIB-D81 Product Description Manual page 148

Error code Description
Failed reselection. Reselection
2C
retried but gave up.
REQ/ACK handshake timeout
2F or controller chip interruption
timeout at the SCSI interface.
30 Reports a unit attention event.
An as yet unsupported LUN
31 specified at the SCSI
interface.
32 Loader not yet ready.
33 Loader front door open.
Currently in reprogramming
34
mode.
35 Currently in menu mode.
Reported an information
36
exception condition.
Reception of drive data
41 timeout at the drive interface.
Received data of abnormal
42 length from drive at the drive
interface.
Drive detected as offline at the
43 drive interface.
Detected calibration error
70 (lower sensor readings
abnormal).
Detected calibration error
71 (notch readings abnormal).
Detected calibration error.
(Upon calibration of the lower
edge of the drive rim, it was
72
detected that it needed to be
calibrated above the upper
limit.)
Because cartridge pickup
failed, when performing
78 recovery it is impossible to do
so because there are no
available slots.
The door lock sensor does not
7A close when attempting to lock
the front door.
The door lock sensor does not
7B lock when attempting to lock
the front door.
The door lock sensor does not
7C unlock when attempting to
open the front door.
Detected a GAP when the
80 elevator is in movement.
Cannot detect the normal
81 number of notches when the
elevator is in movement.
Display
—
—
—
—
—
—
—
—
—
[L ] and [4 1] appear
alternately on the message
display.
[L ] and [4 2] appear
alternately on the message
display.
[L ] and [4 3] appear
alternately on the message
display.
[L ] and [7 0] appear
alternately on the message
display.
[L ] and [7 1] appear
alternately on the message
display.
[L ] and [7 2] appear
alternately on the message
display.
[L ] and [7 8] appear
alternately on the message
display.
[L ] and [7 A] appear
alternately on the message
display.
[L ] and [7 B] appear
alternately on the message
display.
[L ] and [7 C] appear
alternately on the message
display.
[L ] and [8 0] appear
alternately on the message
display.
[L ] and [8 1] appear
alternately on the message
display.
Appendix
Logged
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
148