Medium Auxiliary Memory Attribute Data - Sony LIB-D81 Product Description Manual

8.10.6. Medium Auxiliary Memory Attribute Data

The FIRST ELEMENT ADDRESS area indicates the first Element of the type
shown by ELEMENT TYPE CODE within the autoloader.
The NUMBER OF ELEMENTS area indicates the total number of ELEMENTs
in the table above within the autoloader.
The following is an example of the data reported by the autoloader.
Bit 7 6
Byte
0 (MSB)
3
4
5 (MSB)
6
7 (MSB)
8
9
10 (MSB)
11
12 (MSB)
13
Table 8.10.5.2 : Parameter data for ELEMENT LIST service action
This is the format of the data reported as a result of the READ ATTRIBUTE
command. When using a Medium Auxiliary-related command, refer to the
following Attribute formats.
Bit 7 6
Byte
0 (MSB)
1
2 READ
ONLY
3 (MSB)
4
5 (MSB)
n
Table 8.10.6.1 : Attribute format
ATTRIBUTE ID is the binary identifier of an Attribute.
The READ ONLY bit shows whether this Attribute is Read-only. A READ
ONLY bit of 0 indicates that the Attribute can be overwritten by the WRITE
ATTRIBUTE command. A READ ONLY bit of 1 indicates that the Attribute
cannot be changed and the WRITE ATTRIBUTE command is ignored. The
autoloader does not support the WRITE ATTRIBUTE command.
5 4 3
AVAILABLE DATA(0Ah)
ELEMENT TYPE CODE(02h)
FIRST ELEMENT ADDRESS(01h)
NUMBER OF ELEMENTS(08h)
ELEMENT TYPE CODE(04h)
FIRST ELEMENT ADDRESS(52h)
NUMBER OF ELEMENTS(01h)
5 4 3
ATTRIBUTE ID
Reserved(0)
ATTRIBUTE LENGTH(n-4)
ATTRIBUTE VALUE
Chapter 8 SCSI Commands
2 1 0
(LSB)
(LSB)
(LSB)
(LSB)
(LSB)
2 1 0
(LSB)
FORMAT
(LSB)
(LSB)
102