Flight Id Reporting - Garmin G1000 Cockpit Reference Manual

SECTION 4 – NAV/COM &
TRANSPONDER
Enter Code Using the FMS Knob
1) Select the XPDR Softkey to display the
transponder Mode Selection softkeys.
2) Select the CODE Softkey to display the
transponder Code Selection softkeys, which
includes the digit softkeys.
3) Turn the small FMS Knob to enter the first two
digits.
4) Turn the large FMS Knob to place the cursor
in position to change the second two digits.
5) Turn the small FMS Knob to enter the second
two digits.
6) Press the ENT Key to activate the code
immediately, or wait 10 seconds and the code
will become active.

Flight ID Reporting

If so configured, the Flight ID may be entered in the
Timer/Reference Window.
Figure 4-16 Timer/References Window
1) Select the TMR/REF Softkey to display the Timer/
References Window.
2) Turn the large FMS Knob to place the cursor in the
Flight ID field.
4-6
Flight ID
PFD Entry
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
3) Turn the small FMS Knob to enter the desired first
character.
4) Turn the large FMS knob to place the cursor in the
next desired field.
5) Turn the small FMS Knob to enter the next desired
character.
6) Repeat steps 4 and 5 until the desired Flight ID is
entered.
7) Press the ENT Key. 'updating' is displayed as the
Flight ID is loaded into the system.
190-00708-00 Rev. A