Ads-B Out; Flight Id Reporting - Garmin G3X Touch Pilot's Manual

IDENT FUNCTION
Touching IDENT sends a distinct identity indication to Air Traffic Control (ATC).
The indication distinguishes the identing transponder from all the others on the air
traffic controller's screen. After touching IDENT the bar on the button turns green
momentarily.

ADS-B OUT

When configured with an ADS-B Out capable transponder, 'NO ADSB' is displayed
in yellow, in the Transponder Data Box, if the ADS-B Out broadcast has been manually
disabled or if the transponder does not have the required GPS data.

FLIGHT ID REPORTING

NOTE: The Flight ID must be configured to 'Set By Pilot' in Configuration
Mode for the Flight ID option to appear on the Transponder Page. Refer to
the G3X Touch Installation Manual for more information.
Entering a Flight ID:
1) Touch the transponder data box on the PFD.
2) Touch Flight ID.
3) Enter the Flight ID using the keypad and touch OK.
190-01754-00 Rev. A
Flight ID (Transponder Data Box)
Garmin G3X Touch Pilot's Guide
CNS Interface
81