Setting The Field Of View - Bosch AVIOTEC IP starlight 8000 Operation And Commissioning Manual

AVIOTEC IP starlight 8000
A
B
C
Chose the right mounting variant for your application and mount the device according to the
following options:
1.
2.
3.
4.
4.6

Setting the field of view

After the camera is mounted to the surface, the field of view can be set.
1
2
The field of view must be set manually according to the following steps:
1.
2.
3.
The camera lens has a motorized automatic back focus to adjust the focus at a later time via
the camera menu.
Bosch Sicherheitssysteme GmbH
Ceiling mount
Wall mount
Stand mount
Install the mounting bracket.
Attach the camera to the bracket and tighten the camera lock ring.
Adjust the angle of the camera to set the field of view.
Tighten the mounting bracket lock ring to fix the camera in the desired position.
Manually adjust the focal length on the lens to obtain the required field of view.
Manually adjust the focus on the lens to obtain the sharpest image possible.
Focus the image in the center of the monitored area to avoid blurring as much as
possible.
Operation and Commissioning Manual
focal length
focus
Installation | en 21
2020.08 | 01 | F.01U.391.015