Access To The Device; Access Via Web Interface; Configuration Manager - Bosch AVIOTEC IP starlight 8000 Operation And Commissioning Manual

Hide thumbs Also See for AVIOTEC IP starlight 8000:
Table of Contents

Advertisement

32
en | Access to the device
6

Access to the device

The unit must have a valid IP address and a compatible subnet mask to operate on your
network.
If the network has a DHCP server for the dynamic assignment of IP addresses, select On or On
plus Link-Local to automatically accept the DHCP-assigned IP address.
If no DHCP server is available select On plus Link-Local to automatically assign a Link-Local
(Auto-IP) address.
For certain applications, the DHCP server must support the fixed assignment between IP
address and MAC address, and must be appropriately set up so that, once an IP address is
assigned, it is retained each time the system is rebooted.
6.1

Access via web interface

Please note that an Internet Explorer with activated ActiveX plugin is required. The plugin is
available at
1.
2.
6.2

Configuration Manager

You can also get access to the camera via Configuration Manager available at
downloadstore.boschsecurity.com/
2020.08 | 01 | F.01U.391.015
https://downloadstore.boschsecurity.com/
Open the Internet Explorer.
Enter the IP address of the camera to get access to the web interface.
Operation and Commissioning Manual
.
.
AVIOTEC IP starlight 8000
https://
Bosch Sicherheitssysteme GmbH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fcs‑8000‑vfd‑b01u.317.536

Table of Contents