Configuration; Setting The Field Of View; Camera Install Wizard - Bosch Dinion IP 8000 MP NBN-80052 Installation Manual

DINION IP 8000 MP
7

Configuration

7.1

Setting the field of view

When the camera is mounted and connected, its field of view
and focus point must be set. To do this:
1.
2.
7.1.1

Camera install wizard

The MENU button on the rear panel is used for accessing the
camera install wizard. The wizard fine-tunes the focus and
optimizes picture sharpness in both bright and low-level lighting
(for example, at night).
When there is a choice in the wizard, the options are selected by
either a short press or a longer press of the MENU button.
Select EXIT to close the wizard.
Notice!
Changing the application variant overwrites your camera
settings with the factory defaults.
Bosch Security Systems
Connect a monitor to the CVBS connector on the rear of
the camera.
Start the install wizard.
4 5 6 | 4 5 6
D A
A L
T A
A R
M
1 2 3 | 1 2 3
- +
CVBS
E
T
H
-
P
o
E
MENU
Configuration | en
2014.09 | v1.0 | AM18-Q0665
25