26
en | Installation
5.6
Camera positioning and field-of-view
The camera module position can be adjusted along three axes
and several zoom positions can be selected.
To help position the camera and set the field-of-view:
1.
2.
3.
4.
CAUTION!
Do not expose the sensors to direct sunlight.
AM18-Q0637 | v1.0 | 2012.12
Connect a monitor to the 2.5 mm jack using the optional
monitor cable (S1460) which provides a CVBS signal (for
installation purposes only).
Apply power to the camera.
After power-up, wait a little (about 20 seconds).
Press the Menu button. This stops the IP video stream and
enables the service video analog output.
S1460
Installation Manual
FLEXIDOME HD VR
FoV
Bosch Security Systems