Field Of View; Iris Value; Application Variant - Bosch NBN-80122 Installation Manual

26 en | Configuration
7.2.1

Field of view

Use the monitor image to manually point the camera at the area
to be covered.
7.2.2

Iris value

(not for factory-fitted lenses)
Manually select the iris f-value on the lens (for our telephoto
lenses we recommend a value of 2.8).
7.2.3

Application variant

Notice!
Changing the application variant overwrites your camera
settings with the factory defaults.
If required, change the camera application variant as follows:
1.
2.
3.
4.
7.2.4 Focus
(not for factory-fitted lenses)
The easiest way to focus the lens is via the web browser,
however, to focus locally perform the following steps:
1.
2.
3.
4.
5.
2015.04 | v2.0 | AM18-Q0688
Briefly press Menu until the required variant is displayed.
Press Menu for a longer time to assign the selected variant.
Press Menu for a longer time to confirm your choice.
Wait for the camera to reboot.
Briefly press Menu to open the local set-up menu.
Press Menu for a longer time to continue past application
variant selection.
Briefly press Menu to center the focus range (wait until
ready).
Briefly press Menu to start the motorized automatic back
focus process (wait until ready).
Briefly press Menu to exit or press for a longer time to
restart the process.
DINION IP ultra 8000 MP
Bosch Security Systems